how to clean vacuum cleaner hose

How to Clean a Vacuum Cleaner Hose Properly

Last Updated on

Have you ever vacuumed your carpeted floors and then cleaned a rug a few minutes later, only to realize that your appliance has no suction power? Your vacuum hose could be clogged.

If you’ve never unclogged a vacuum hose before, don’t worry. This comprehensive guide will teach you how to clean a vacuum cleaner hose with ease. Let’s get started!

Why Should You Clean Your Vacuum’s Hose?

It is vital to keep your hoses clean. It is often clogged with hair and other debris, which prevents the vacuum from working correctly. A dirty hose can lead to clogs in the vacuum bag or dirt being released back into the air when you use your device.

It also means that the vacuum cleaner is not working as efficiently as it should be, which can lead to an increase in your electricity bill. In addition, a vacuum cleaner with a clogged hose may damage the motor if the problem is not fixed promptly.

While a vacuum cleaner’s hose is a reasonably easy thing to clean, it is one of those things that often gets forgotten about until something breaks or there’s a problem. The hose should be checked right after each time you vacuum your home or office to make sure there are no blockages before they get worse.

How Often Should You Clean a Vacuum Hose?

You should make sure to clean out the hose every month (or more frequently if needed) to ensure that it is free from dirt and other debris. This will help keep your vacuum running smoothly and prevent any clogs from forming.

In addition, you should check the hose after every use to make sure there are no blockages. If you see that the hose is clogged, take a moment to clear it out before vacuuming again.

Signs You Have a Clogged Vacuum Hose

How do you know your hose is clogged? There are a few telltale signs:

Decreased Suction Power

If this happens, it means that the vacuum hose is too full of dirt to work correctly. Hair or debris may be stuck in the hose. This blockage may very well cause damage to the vacuum’s motor if not removed quickly enough!

Debris on Your Carpet

If your vacuum cleaner leaves dirt on the carpet after you have just vacuumed, then it means that there are blockages in the tube.

Bad Odors

Your vacuum smells odd or gives off bad odors. This usually means pet hair or damp particles are stuck within the folds of the hose. Remember, a clean vacuum hose doesn’t give off funky smells.

Odd Noises

You notice an unusual noise when switched on. If your appliance makes an odd noise when turned on, this could mean that something is stuck in the hose. This could be caused by clogged debris disrupting how well it can pick up dirt from your carpeting.

If you’ve been having any of these problems, your hose likely needs to be cleaned. The following section will teach you how to clean a clogged vacuum hose.

A Guide on How to Clean a Vacuum Cleaner Hose Properly

Now that you know why it is essential to maintain a clean vacuum hose, let’s look at the cleaning process. This is a relatively easy task that can be done in a few minutes. The following are the steps on how to clean a vacuum hose you need to follow:

Step 1: Prepare Your Materials

All you need for cleaning your device’s hose are:

  • A bucket or sink
  • Mild detergent or dish soap
  • Warm water
  • Baking soda
  • Bottle cleaning brush
  • Dust container
  • Dry cloth
  • Baking soda
  • Vinegar
  • Broom/mop/metal wire

Step 2: Fill Up the Bucket or Sink With Warm Water

Fill the bucket or sink with warm water and add a few drops of dish soap. The water should be deep enough for you to submerge the hose completely.

Step 3: Detach the Hose From the Vacuum Cleaner

Please turn off your vacuum cleaner and unplug it from the power outlet. Next, detach the hose from the back of your vacuum cleaner.

Step 4: Remove Stuck Hair and Other Particles

With a dry cloth, wipe down any dust and grime that may have accumulated on the vacuum’s hose. Visually inspect the hose.

If you’re wondering how to unclog a vacuum hose, push out visible clumps of pet hair and furniture stuffing with a thin broom handle or a long stick.

Take time doing this step. You need to make sure you’re removing large clogs that may be impeding air movement throughout the entire length of the hose.

If you have trouble picking stubborn clumps, you can take a long metal wire and coil one end into a loop (or a wire hanger). Carefully slide the wire through the top opening to push out large clumps towards the other end. In addition, you can use a feather duster for good measure.

You should have a dust container to catch all the dislodged debris. Remember to be very careful when unclogging the hose with a broom or a mop handle. The tubing is made of lightweight plastic. Don’t use excessive force, or you may puncture the tube.

Step 5: Wash the Vacuum Hose

Wash the hose in the sink or bucket to remove stubborn dirt stuck within the inner folds of the vacuum hose. Submerge the entire hose in soapy water to eliminate any excess dirt and tough grime. Give it a good swirl.

Use a bottle washer or cleaning brush to wash interiors and give the outside a thorough wipe using a damp cloth. You won’t need a special vacuum hose cleaning brush for this step.

For a deeper clean, add half a cup of baking soda to two cups of diluted distilled white vinegar and slowly pour the mixture into the hose.

Step 6: Rinse and Dry the Vacuum Hose Properly

The next step is to rinse it thoroughly with clean water. Let running cold water from the faucet flush out any remaining clumps. Give it a good shake to remove clumps and excess water inside the hose.

Finally, let the vacuum hose dry for several hours. You can hang it on your shower curtain rod or something similar. The drying time will vary depending on the size and length of your vacuum hose.

Step 7: Reattach It to Your Vacuum Cleaner

Reattach the hose and turn on your machine for at least five minutes to ensure everything is working correctly again.

If you notice a loss of suction power or a persistent bad smell or strange noise, consult an expert for possible repairs.

FAQs on Vacuum Hose Maintenance

How Do You Clean a Smelly Vacuum Hose?

If your vacuum cleaner’s hose smells bad, it may be due to mold and mildew growth. In this case, you need to wash the hose using a mixture of 1/3 cup baking soda and two cups of white vinegar and water solution.

Pour the solution inside the hose and let it soak for about 15 minutes. Rinse with clean water and let it dry completely before reattaching it

How Do You Clean the Inside of a Hose?

The inside of the hose can be cleaned using a bottle brush or a cleaning brush. You can also use a broom handle or a thin, long stick to remove large clumps.

How Do You Dry a Vacuum Cleaner’s Hose?

The vacuum hose can be dried by hanging it on a shower curtain rod. The drying time will depend on the hose length, but it usually takes several hours to one day.

What’s the Best Tool to Unclog a Vacuum Hose?

The hose can be unclogged using a broom handle or a long stick. You can also use a metal wire with a looped end to dislodge stuck clumps.

The same tools can be used if you’re wondering how to get something out of a vacuum hose.

Cleaning Your Home Efficiently

Now that you know how to clean a vacuum cleaner hose properly, there’s no need to worry about dust buildup damaging your vacuum. Develop the habit of doing regular maintenance on your devices, and you can avoid problems down the road and keep your vacuum cleaners running smoothly for years!

We hope you found this step-by-step guide on how to clean a vacuum hose useful. If you need more maintenance and cleaning tips for specific vacuum cleaners or some other appliance, let us know in the comments!

Additional Resources

Leave a Comment

Your email address will not be published.

Scroll to Top