Last Updated on
If you have a bloody nose or cut yourself, and there’s blood all over your carpet, don’t panic! You can get the blood out of carpets and rugs with simple cleaning supplies.
This comprehensive guide talks about how to get blood out of carpet using items you’d usually find in your household.
How to Get Blood Out of Carpet: 7 Effective Ways
There are several ways to remove blood stains from carpets. However, it is best to remove blood from your carpet while it is fresh since it would be easier to clean up.
Method 1: Remove Blood Stains With Cold Water
To remove fresh blood from your carpeted floors, you only need to spray cold water on the fresh bloodstain. Dab the spot dry with a clean towel. Remember not to rub the area as this will only cause the blood to stain the carpet even more.
You need to do this process repeatedly until you’ve removed as much blood as possible. You can then use a wet and dry vacuum cleaner to remove moisture, and any particles stuck on the carpet’s fibers. Allow the area to air dry thoroughly.
Method 2: Remove Dried Blood Stain With Dish Soap, Vinegar, and Water
A dried blood stain is a bit tricky to remove from carpets. To draw out the blood, fill a spray bottle with some white vinegar, warm water, and a few drops of the dish soap.
Next, apply the mixture directly onto the affected area. The vinegar and dish soap should quickly break down the dried blood.
Wipe the blood-stained area with a clean cloth. After the stain has been completely removed, extract the excess moisture from your carpet with a wet vac. Allow your carpet to dry thoroughly before using it again.
Method 3: Remove Fresh Blood Stains With Baking Soda and Water
In order to remove wet blood from carpets, the key is to lift the stain as soon as it happens. Hence, blot the blood with a paper towel to absorb as much fluid as possible. Refrain from scrubbing the affected area to prevent spreading the stain.
Combine baking soda and cold water until you create a thick paste. Apply the baking soda paste onto the stain. Allow the solution to sit for a few minutes before blotting the area gently with a clean cloth or dry towel. Blot the area until you have removed all of the blood from the carpet fibers.
Once the stain is completely wiped from your carpet, allow the area to dry for a few hours completely. Use a wet and dry vacuum cleaner to remove excess moisture and loose debris for best results.
Method 4: Removing Blood Stains With Water and Ammonia Solution
To remove fresh stains from the carpet, mix 1/2 cup water and one tablespoon of ammonia. Apply the cleaning solution directly onto the stain with a clean cloth.
After about five minutes, blot up as much of the liquid as possible using a sponge or a dry cloth. Next, wipe the area with a sponge dipped in cold water. Blot the area dry with a dry cloth.
Pro Tip: This stain removal method is not for wool carpets. Ammonia is known to damage the fabric of woolen carpets.
Method 5: Using the Salt Paste as a Stain Remover
The salt paste method is excellent for removing dried blood from carpets. In a small bowl, create a thin paste by adding salt to the water. Apply the paste onto the stained area. Let it sit for a few minutes before you blot the stain with a dry towel.
Take care not to rub the stain to avoid spreading it. Allow the area to dry thoroughly before walking on it.
Method 6: Remove Blood With Baking, Vinegar, and Warm Water
If you’re wondering how to remove blood out of carpets with baking soda, white vinegar, and warm water, here’s how:
- Fill a spray bottle with two cups each of vinegar and warm water.
- Add about four heaping tablespoons of baking soda.
- Apply the cleaning solution directly onto the stain.
- Let it sit for at least five minutes before you blot the area dry with a white cloth.
These are some of the effective ways that can get blood out of your carpets without having to resort to professional cleaning services. If none work, you can always call a professional to help you out.
Method 7: Using Hydrogen Peroxide on Blood-Stained Carpets
Hydrogen peroxide can be used to remove old bloodstains, being one of the most potent stain removal products available. It is also effective for eliminating mold and mildew.
However, you must be extra careful when utilizing this method as it may or may not cause discolorations in your carpet. Follow the simple DIY guide below on how to get blood out of carpets with peroxide.
Step 1: Do a Spot Test
As we’ve mentioned, hydrogen peroxide may not be suitable for all types of carpet material. Hence, you need to test it on a small, hidden area on your rug. Slightly dip a cotton swab in hydrogen peroxide and apply it to your chosen spot.
Step 2: Observe Carpet for Changes in color
Let it stand for several minutes to see how the carpet fibers react. If you don’t see any changes in the carpet’s color, it is okay to apply the product to the stain.
Step 3: Apply Hydrogen Peroxide on the Stain
Using a cotton swab, apply the product to the stain. Leave the liquid to soak for at least an hour.
Step 4: Rinse the Area
Take a wet cloth and rinse the treated area. Allow the site to air dry for a few hours.
Pro Tip: You can repeat the cleaning process until you completely remove the stain.
Essential Carpet Stain Removal Tips for Beginners
Below are carpet stain removal tips every homeowner must keep in mind:
- Before using it, make sure you read the label on any home carpet stain remover.
- Wipe spills as soon as they happen to prevent permanent stains on your carpeted floors.
- Always test any new carpet cleaning product on a hidden area of your rug before applying it.
- When using hydrogen peroxide, make sure you don’t apply too much as this can discolor some types of carpets. Remember that prolonged exposure to sunlight will cause the stain to come back after bleaching out.
- Avoid using hydrogen peroxide on dark-colored rugs as it may cause discoloration.
- Never scrub the stain, as this will only spread it. Instead, use a blotting motion to absorb the liquid.
- If using ammonia, avoid using it on wool carpets as it may damage the fabric.
- When using a salt paste, make sure you create a thin paste and avoid rubbing the stain. If needed, apply more salt to the area until the stain is gone.
- After treating a stain, allow the area to dry completely before walking on it or replacing the furniture. Excess moisture fosters mold and mildew growth on carpeting.
- When removing stains, make sure you use non-toxic methods, mainly if you live with kids or pets.
- If the stain is still visible after trying all of the methods mentioned, it is best to seek professional help.
How to Keep Carpets Clean and Smelling Fresh
Now that we’ve taught you how to get blood out of your carpets, it’s essential that you learn how to keep your carpets clean and to smell fresh. Below are some tips:
- Vacuum your carpets at least once a week- this will remove dirt, dust, and other particles that can cause stains and odors.
- Clean up spills and stains immediately- this will keep your carpets looking fresh and clean.
- Use a carpet deodorizer safe for pets and children to minimize odors caused by dirt, dust mites, pet dander, and mold.
- Use cleaning solutions appropriate for your carpet material. Some materials like wool and silk are more delicate and require special care.
- Professional carpet cleaning at least once a year is recommended to remove deep-seated dirt and grime that regular vacuuming can’t get rid of. Steam cleaning techniques are great for removing stains and killing mold.
- Avoid wearing shoes in the house, which can bring about contaminants such as pesticides from public areas, mud, and other debris.
- Keep a close eye on children and pets when they’re playing around the house, as they are often the ones who cause spills and stains.
- Ensure you deodorize pet messes immediately, as this will only lead to an unpleasant smell in your house.
- Place dirt-trapping mats at all entrances of your house to prevent dirt and dust from entering. This will minimize dirt brought into the house.
- Avoid excessive moisture on your carpets. If you must get them wet, make sure you allow them to dry thoroughly. This will prevent the growth of mold and mildew, and musty odors.
Following these tips can help keep your carpets looking clean and smelling fresh for years to come!
FAQs About Removing Blood Stains From Carpet
What Is the Best Way to Get Blood Out of Carpets?
There are a few ways to get blood from carpets, but the most effective is to use hydrogen peroxide and water mixture.
First, blot the area with a paper towel to absorb as much blood as possible. Then, mix one-part hydrogen peroxide with two parts of water in a spray bottle. Spray the solution on the stain. If the stain is still visible after waiting for a few minutes, you can repeat this process. Patience is key in this situation!
If that doesn’t work, try using a mixture of dish soap and hydrogen peroxide on the blood stains and see if that works.
Can Dried Blood Stains Be Removed?
In most cases, dried blood stains can be removed from carpets. First, you will need to use a butter knife or spoon and scrape as much of the solidified blood off as possible.
Next, place an ice cube on the area and allow it to sit for five minutes before blotting with a paper towel again until dry. Finally, use a damp cloth with dish soap and hydrogen peroxide solution to remove any remaining stains.
If this doesn’t work, try using warm water mixed with salt on the area until you are satisfied with the results.
What if I Can’t Get Blood Out of My Carpet?
If you can’t remove blood stains using DY methods, it is best to call a professional carpet cleaner. They will have the necessary tools and knowledge to get the job done quickly and effectively. Leave it up to the experts!
Will Baking Soda Get Blood Out of Carpets?
Yes, baking soda paste can be used to remove blood from carpets. After applying it, let it sit for a while before you blot the area dry with a dry cloth. Repeat this process until you are satisfied with how clean your carpets look!
Does Ammonia Get Blood Out of Carpets?
Yes, but ammonia should not be used on delicate materials like wool as it may damage the fiber. Use this product with caution.
How to Get Blood Out of Carpets With Vinegar?
Mix one-part white vinegar with three parts water in a spray bottle to get blood out of carpets with vinegar. Then, spritz the mixture onto the stained area and blot with a clean cloth. Keep repeating this process until the stain disappears.
Can Hydrogen Peroxide Be Used on Silk/Satin Rugs?
No, hydrogen peroxide should not be used on silk or satin rugs as it may damage the fiber. Only use this method if you are sure that the carpet is made of synthetic material.
What Can I Use Instead of Hydrogen Peroxide?
You can use household products like baking soda, white vinegar, dish soap, and salt to clean up a bloodstain instead of peroxide.
Cleaning Blood-Stained Carpets With Ease
Now that you know how to get blood out of carpets, you no longer have to worry about those unsightly stains! By following the tips and tricks in this guide, you can remove fresh and dried stains quickly and easily. Remember to choose the stain removal method that suits your carpets best.
If you have any questions about carpet maintenance, feel free to post them in the comments section below! For more cleaning guides, check out the other guides in this blog!