why is my carpet cleaner not picking up water

Why Is My Carpet Cleaner Not Picking Up Water?

Last Updated on

Why is my carpet cleaner not picking up water? Why is this happening, and what can I do about it?

If you’ve ever asked these questions, you’re in luck. This simple guide will help to answer those questions. We’ve also included easy-to-follow carpet cleaner maintenance tips.

Reasons Why Your Carpet Cleaner Isn’t Picking Up Water

Carpets chemical cleaning with professionally extraction method. Early spring cleaning or regular clean up.

Here are some reasons your carpet cleaner may not be picking up water.

Filter Needs Changing

Your carpet cleaner may not be picking up water because the filter needs to be changed. When the air filter clogs up, it can prevent the machine from sucking up any liquid. Hence, check and see if the filter needs to be replaced, and if it does, then do so as soon as possible!

Full Dirty Water Tank

If your cleaning device isn’t picking up water, the dirty tank may be full. Check to see if you need to empty your machine’s dirty tank. If the dirty water tank is full, then it follows that your carpet cleaner will be unable to vacuum more water.

Clogged Machine

Is your carpet shampooer not picking up water? The machine may be clogged. If something is blocking the hose or nozzle, then the machine will not function properly. Be sure to check for any obstructions and remove them if necessary.

Incorrect Settings

Is your carpet cleaning not suctioning water? It’s possible that you have the settings wrong. Be sure to check and see if the machine is in the correct mode. If it’s not, then change it so that your carpet shampooer will be able to pick up water as it’s supposed to.

Loose Connections

It’s also possible that the problem is due to a loose connection. If one of your machine’s parts has come off, it will not be able to suck up water properly. Check for any loose or broken connections and try reattaching them- you should see results after doing so!

Loss In Suction Power Due to Build-Up

Over time, your cleaning tool may lose its suction power. This can be due to the machine’s build-up of dirt and dust.

If the unit is not sucking, it’s worth checking for chunks of hair and debris that may be blocking the hose or nozzle.

Check the brush bar for any stuck hair and gently pull. Be extra careful so you don’t end up damaging the bristles. Once done, double-check if your shampooer starts sucking water from your carpeted floor again.

Damaged Internal Components

Make sure that the internal seals and the suction port of the unit are in perfect working condition.

If a seal is damaged, water may leak out from the carpet cleaner. On the other hand, a malfunctioning suction port results in the carpet cleaner’s inability to remove moisture from your carpet.

Remember that it is imperative that you let a professional repair it when you can’t fix the issue. Using a faulty machine for extended periods may damage the motor over time and even lead to overheating.

Incorrect Placement

If your carpet cleaner isn’t picking up water, you may have placed the machine in an incorrect position. Putting it on a stable, flat, and level surface will enable it to suck out liquid properly.

If you’ve tried the above-mentioned troubleshooting steps and your carpet cleaner still isn’t picking up water, then it’s probably time to bring the unit for professional repairs. A faulty machine will not function correctly without any issues at all.

Carpet Cleaner Maintenance Tips

To see to it that your carpet cleaning machine can pick up water, then be sure to follow these simple tips:

Safety First

Keep safety in mind when using the appliance. Ensure that the power button is turned off and the device unplugged before you start cleaning your carpet cleaner. For obvious reasons, don’t leave your appliance unattended when pets or kids are in the same room where you’re using or cleaning it.

Never attempt to troubleshoot a machine that emits a burnt smell. If you think that your device is overheating, then unplug it immediately and let it cool down. 

Also, it is best that you consider consulting a professional or replacing your device if the issue persists. It may be better to purchase a new one than to have your appliance repaired. 

Read the Manual

Be sure always to read the manufacturer’s instruction manual. This is especially important for carpet cleaners, as there are specific ways that they should be used to achieve maximum results.

If you have a Vax carpet cleaner and no manual is included in the box, you can always find it online. It should be able to download from the Vax website.

Use the Right Cleaning Agents

Make sure that you are using the correct detergent or cleaning solution for your type of carpet. Using the wrong cleaning agent can damage your carpet and make it more difficult for the cleaner to pick up water.

Vacuum Your Carpet

Be sure to deep clean your carpet before using the cleaner. This will help remove any dirt or debris that may get in the way of the cleaner’s ability to pick up water.

Pre-Treat Stains

If you have a particularly dirty or stained carpet, be sure to pre-treat the stains before using the carpet cleaning machine. This will help the cleaner remove any dirt or lift stains already present.

Proper Storage

Wash any removable parts after using your carpet cleaner. Clean the filters after every use. Ensure that you have a clean water tank before storing your carpet shampooer.

Following these tips should help keep your carpet looking its best and ensure that your carpet cleaner can do its job correctly.

Frequently Asked Questions About Carpet Cleaners

How Do You Fix Suction on a Bissell Carpet Cleaner?

When water is not being vacuumed up by a carpet cleaning device, the problem could be caused by one of three things:

The dirty tank might need to be emptied. The air filter may require replacement, or it could be clogged with dirt and dust. Finally, there is also the chance that the suction control device requires adjustment or cleaning.

How Do I Troubleshoot a Vax Carpet Cleaner?

A few common issues can occur with Vax carpet cleaners, and these can usually be fixed quite easily.

If the cleaner is not picking up water, check to ensure that the dirty tank is empty and clean. The hose and nozzle should be free from obstructions and then adjust the appliance’s suction control dial.

Why Is My Carpet Shampooer Not Picking up Water?

There are several things that you can do to troubleshoot this problem. Firstly, check to make sure that the dirty tank is empty and clean. You should also ensure that the hose and nozzle attachments should be free from clogs and obstructions. In addition, check if you have the correct settings.

Bissell or Vax Carpet Cleaners – Which Is Better?

Both brands of carpet cleaners offer high-quality results and can clean your carpets to a good standard. They also come with different features, so there is no definite answer as to which one is better.

If you are looking for an upright cleaner, the Bissell PowerClean comes with tools that make it easy to maneuver in tight spaces such as stairs. The Vax TwinTank, on the other hand, is an excellent option if you are looking for a handheld cleaner as it comes with a detachable hose and multiple tools.

Ultimately, it is up to personal preference which one you choose.

Cleaning Carpets and Rugs With Ease

Carpet cleaners and shampooers are tools that make cleaning easier for homeowners. Hopefully, this blog post has answered the question, ‘Why is my carpet cleaner not picking up water?” and equipped you with essential troubleshooting tips.

Do you have a carpet cleaner at home? What issues have you encountered so far? Were you able to fix them? Let us know in the comments.

Additional Resources

Leave a Comment

Your email address will not be published.

Scroll to Top